The slide wire that’s mainly to supply power supply for the long travel of overhead crane generally is divided into seamless slide wire, multi pole slide wire and single pole slide wire.
The slide wire is a group of power transmission devices that supply power to mobile equipment. It is mainly suitable for all kinds of cranes, production lines, three-dimensional warehouses and mobile power supply facilities and places. The products are safe and energy-saving, simple and fast to install, and the service life of the slide wire can reach more than 15 years.
Seamless slide wire is produced with advanced technology. 3 pole, 4 pole, 6 pole seamless slide wire, with permanent electricity, power supply with oxygen-free copper, pressure drop force, better conductivity, and good to contact, easy to install, not easy to wear, easy to replace, more convenient to transport, not easy to cause damage to the slide wire, and prolong the service life.
The seamless slide wire product has advanced technology, fine workmanship, and beautiful appearance. It is an ideal replacement product for the lifting industry system. It has widely absorbed the essence of science and technology, forge ahead, pioneered and innovated, and the products have been serialized, standardized, and can be customized Special design and manufacturing are required.
Features of seamless slide wire: safety, stability, no interface (except for the power supply point), small size, convenient installation, and economical;
- The seamless slide wire is installed without joints, which is simple and time-saving, and has a small space.
- The seamless slide wire is made of special material, which runs smoothly, with high speed and low noise.
- The installation bending radius of the seamless slide wire is small, and the minimum bending radius is 750mm.
The multi-pole slide wire is composed of high-strength engineering plastic insulated pipes or aluminum alloy protective sleeves, multi-pole conductive copper bars, current collectors, suspension, and fixed components.
This product is widely used in factories and mines, metallurgy, power generation, cranes, automated production lines and other mobile feeder equipment due to its compact design, safety, reliability, and economic convenience.
Product features
- Advantages of multi-pole slide wire: small space occupation, flexible combination, small bend radius, convenient and quick installation.
- Application areas: Port transportation, papermaking, tap water, automobile manufacturing, home appliances, logistics and other industries.
a. Product model and specification
- A single-stage rail maximum continuous current carrying capacity: 50A; 80A; 125A; 140A; 170A; 210A; 270A; 320A; 360A
- Two single-level rail cross-sectional area: 10mm2; 16mm2; 25mm2; 35mm2; 50mm2; 70mm2; 95mm2; 150mm2
- Number of three conductive phases: 3 phases; 4 phases; 5 phases; 6 phases; 7 phases; 8 phases; 12 phases; 14 phases
- Four-tube slip wire: J-aluminum alloy; R-elbow; common type is not standard
b. Collector
- A brush carrying capacity: 40A; 60A; 150A
- Number of two brush phases: 3 phases; 4 phases; 5 phases; 6 phases; 7 phases; 8 phases; 12 phases; 14 phases
- Three characteristics: A-aluminum alloy; R-elbow
- Four collectors: multi-stage tubular collectors
Multipole tube slide wire can be used for hoisting machinery such as electric hoists, beam and overhead cranes in factories and mines, warehouses, stations, ports and docks.
- (1) This series of products has three types: compound type, square tube type and split type.
- (2) The power supply safety slide wire series products developed by our institute are complete and have a wide range of uses. They can be used for hoisting machinery in factories and mines, warehouses, stations, ports and docks, such as: electric hoists, beam and bridge cranes; elevators, automation Conductive equipment for production lines and other mobile operations.
- (3) The user can correctly select the power supply safety trolley line of the appropriate specifications according to the crane machinery model, so as to meet the power consumption of the lifting machinery, but also save electricity, energy and reduce energy consumption and other technical and economic indicators.
- (4) The correct selection of power supply safety trolley wire is the key to obtain the best technical and economic effects. According to reliability research, the use of this trolley wire can increase the reliability of the system by two orders of magnitude. The user should refer to this manual in detail when selecting the power supply slide wire to fully understand the product performance and characteristics, so as to obtain the best use effect.
Single pole slide wire is mainly divided into monopolar aluminum slide wire, unipolar copper trolley wire, steel body trolley wire, multi-pole tube trolley wire, seamless trolley wire, copper contact wire and other commonly used ones. Touch the line. Single pole trolley wire, multi-pole tube trolley wire, seamless trolley wire are safety trolley wire, and steel body trolley wire is non-safety trolley wire. Its conductor is made of aluminum alloy profile, and its outer sheath is made of special polyvinyl chloride material, which plays the role of preventing rain, dust, snow and electric shock.
The single pole slide wire has simple structure and convenient installation and maintenance. It is widely used in the power supply line of mobile equipment such as mines, metallurgy, chemical industry, machinery, docks, and freight yards.
Features:
- 1. It is safe and reliable, there is no danger of electric shock even if it is touched by fingers, and it meets the IP23 standard.
- 2. Energy saving and consumption reduction, special formula aluminum alloy profile is used as conductor; low resistance, which can reduce the loss of electric energy to the greatest extent.
- 3. The sheath and accessories are universal.
- 4. The product meets the national JB6391.1-92 and JB6391.2-92 standards.
- 5. Long service life, the conductor sheath also adopts a unique formula, which greatly extends the service life of the unipolar trolley wire system.
- 6. The combined design is easy to install and maintain, and is especially suitable for high-altitude operations.
- 7. The collector can move in three-dimensional space, which can meet the uninterrupted power supply of the power supply equipment; the double insulation design is adopted, and the work is safer and more reliable.
- 8. New materials, new technologies and new processes ensure that the products have higher corrosion resistance, acid resistance, weather resistance and operating temperature range, and the working performance is more safe and reliable.
If you need the slide wire for the crane, hoist or other euqipment. Please don’t hesitate to contact us. As top three crane manufacture in China, can customize the design as client’s different requirements.
